Visit Our Website at
www.FairbanksNijhuis.com
FAIRBANKS NIJHUIS
SUBMERSIBLE SOLIDS HANDLING PUMPS
Fairbanks Nijhuis
®
submersible solids handling pumps cover a broad range of hydraulics with
unsurpassed dependability. Driven by the Fairbanks Nijhuis submersible motors – designed
and built in a facility dedicated solely to research, development and testing – our pumps are
unmatched in measures of quality and reliability.
5430W Series
2430W Series
5430M and 5730M Series
2430M Series
Key Features • Secured to sump floor with suction and
discharge hard-piped
• Pull-up type, allowing inspection
• Discharge connection is automatic
when pump is lowered into place
Discharge Sizes inches
Discharge Sizes mm
2" to 24"
50.8 to 609.8 mm
Flow Rates GPM
Flow Rates m
3
/h
15 to 18,000 GPM
3.4 - 4,068 m³/h
Head Ranges feet
Head Ranges meters
5 to 290 feet
1.5 to 88.39 m
Features
• NEW Closed Loop / Self Cooling Motor Design
(250-360 Frames)
• Primary and Secondary Moisture Detectors
• Heat Exchanger is Drain Plug (250-360 Frames)
• Solids Handling Two Vane and Bladeless Impellers
• Two Separate Mechanical Seals
• Power and Control Cable Terminal Board
Applications
Municipal
• Raw Sewage Lift Stations
• Grit Handling
• Sludge Handling and Recirculation
• Digester Cleaning
• Storm Water and Flood Control
• Water Booster Stations
Industrial
• Sludge and Slurry Handling
• Mining
• General Industrial and Commercial Waste
• Milling
• Dewatering
• Irrigation
© 2015 Pentair Ltd. ADFN-02-1